Victory 2009 VISION Rider'S Manual Download | Manualshive

Page: 238 / 323

background image

235

WARRANTY

Wa
rr

an

ty

VICTORY Motorcycle Warranty Policy

Limited Warranty

VICTORY Motorcycle Division, Polaris Sales Inc., P.O. Box 47700, Hamel, Minnesota 55340-9960, gives a ONE

YEAR LIMITED WARRANTY on all components of the VICTORY Motorcycle against defects in material or

workmanship. This warranty covers the parts and labor charges for repair or replacement of defective parts which

are covered by this warranty. This warranty begins on the date of purchase. This warranty is transferable to another

consumer during the warranty period through a VICTORY Motorcycle dealer.

Registration

At the time of sale, the Warranty Registration Form must be completed by your dealer and submitted to VICTORY

Motorcycle Division, Polaris Sales Inc. within ten days. Upon receipt of this registration, VICTORY Motorcycle Divi-

sion, Polaris Sales Inc. will record the registration for warranty. No verification of registration will be sent to the pur-

chaser as the copy of the Warranty Registration Form will be the warranty entitlement. If you have not signed the

original registration and received the “customer copy”, please contact your dealer immediately. NO WARRANTY

COVERAGE WILL BE ALLOWED UNLESS YOUR VICTORY MOTORCYCLE IS REGISTERED WITH VICTORY

MOTORCYCLES DIVISION OF POLARIS SALES INC.
Initial dealer preparation and set-up of your VICTORY Motorcycle is very important in ensuring trouble-free

operation. Purchasing a motorcycle in the crate or without proper dealer set-up will void your warranty coverage.

visionownersmanual.book Page 235 Wednesday, February 13, 2008 4:31 PM

«
...
236
237
238
239
240
...
»

Summary of Contents for 2009 VISION




































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 VISION

Brand: hepco & becker Pages: 4

Brand: VEB Pages: 63

Brand: hepco & becker Pages: 6

Splendor Pro CLASSIC

Brand: HERO Pages: 56

Brand: Vance and hines Pages: 5

Brand: Yamaha Pages: 86

Brand: Yamaha Pages: 88

TDM850'99 4TX-AE3

Brand: Yamaha Pages: 43

Brand: Yamaha Pages: 118

Brand: Yamaha Pages: 92

Brand: Yamaha Pages: 105

Brand: Yamaha Pages: 111

Brand: Yamaha Pages: 88

Brand: Yamaha Pages: 94

STRATOLINER XV19CTSC

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands