Victory 2002 V92TC, Owner'S Manual

Page: 81 / 166

Operation
67
Stopping the Engine
Before stopping the engine, bring the motorcycle to a complete stop either in neutral or with the clutch
disengaged. Once the motorcycle is at a complete stop, if it is not already in neutral, shift into neutral. To stop
the engine, set the engine stop/run switch to the Stop position, turn the ignition switch to the Off position, and
remove the ignition key.
•
Stopping the engine while the motorcycle is in motion and the transmission is engaged may
damage the engine and the transmission or cause the rear wheel to lose traction. In either case,
you may lose control of the motorcycle.
•
If the motorcycle is in motion and the engine stops on its own, guide the motorcycle to a safe
location off the road and away from traffic.
WARNING
Parking
When parking the motorcycle, choose a flat, firm surface. Bring the motorcycle to a complete stop and, with
the transmission in neutral, stop the engine. Fully extend the sidestand, turn the handlebars to the left, and
lean the motorcycle to the left until the sidestand firmly supports the motorcycle. Lock the steering lock, and
take the key with you.
Moving or operating the motorcycle with the forks locked severely restricts steering and can cause
you to drop or lose control of the motorcycle.
WARNING