Victory 2002 V92TC, Owner'S Manual

Page: 47 / 166

Instruments and Controls
33
If a turn signal bulb has failed, or if there is a short circuit in the turn signal system, the turn signal indicator
flashes at more than twice the normal rate.
Headlamp High Beam Indicator
illuminates when the headlamp switch is set to high beam (see page 38).
Multi--Function Display (MFD)
Use the MFD to view the odometer, the trip odometer, the clock, the fuel gauge, the voltmeter, the instrument
cluster light dimmer, the headlamp high beam indicator light dimmer, and the check engine indicator. The
MFD operates only when the ignition switch is in the On position. To select the desired function, press the
MFD Mode button (page 40). To adjust a particular function, press the MFD Set button (page 39).
Odometer
The odometer is the default mode of the MFD after starting the engine. The odometer shows total miles
traveled.
To toggle the odometer and trip odometer reading between miles and kilometers, and the fuel gauge reading
between gallons and liters, the ignition switch must be in the
On
position with the MFD in odometer mode.
Press and hold the MFD Set button for 3 seconds.
To change to the next MFD function, press the MFD Mode button.
Trip Odometer
“TRIP” appears as part of the display when in trip odometer mode. The trip odometer shows total miles
traveled since the trip odometer was reset. You can use the trip odometer to calculate your miles per gallon
and estimate the number of miles you can travel on a tank of fuel.