Victory 2002 V92TC, Owner'S Manual

Page: 136 / 166

Cleaning and Storage
122
4. Connect the spark plugs to the spark plug wires and ground the spark plugs to the engine. With the
main switch in the On position, the stop/run switch set to Run , and the transmission in neutral, press
the electric starter button to crank the engine a few times. This procedure inhibits corrosion by
coating the cylinder walls with the oil you poured in the spark plug holes.
5. Set the main switch to the Off position and reinstall the spark plugs.
Inflate Tires
Inflate the tires to normal pressure.
Remove, Clean, and Store Battery
1. Remove the battery (see “Remove Battery” page 106).
2. To clean oxidation from the battery posts and cable connectors, use a wire brush. Wash the posts and
cable connectors with a solution of 1 part baking soda to 16 parts water. Rinse with clean water and
wipe dry. Apply a thin film of dielectric grease to the posts and cable connectors.
3. Clean the outside of the battery with a solution of mild detergent and warm water.
4. Store the battery in a dry location that maintains a temperature of 32
_
to 90
_
F (0
_
to 32
_
C).
5. While in storage, fully charge the battery once a month (see “Charge Battery” page 106).
Park and Cover the Motorcycle
Park the motorcycle in its storage location and lock the steering. Cover the motorcycle with a durable,
breathable material or with a high--quality motorcycle cover designed for storage. Covering the motorcycle
helps protect it from dust and other airborne materials. The cover must be of a breathable material to prevent
moisture from building up on the motorcycle.