Victory 2002 V92TC, Owner'S Manual

Page: 48 / 166

Instruments and Controls
34
To reset the trip odometer, the ignition switch must be in the
On
position with the MFD in trip odometer
mode. Press and hold the MFD Set button for 3 seconds.
To change to the next MFD function, press the MFD Mode button.
Clock
A clock icon appears as part of the display when in clock mode. When the clock is operating normally, the
colon between the hour and minutes flashes.
To set the clock, the ignition switch must be in the
On
position with the MFD in clock mode.
1. Press and hold the MFD
Set
button for 3 seconds when in clock mode. The hour digits should flash.
2. Press the MFD
Set
button to select the desired hour.
3. Press the MFD Mode button to accept the new hour setting. The ten--minute digit should flash.
4. Press the MFD Set button to select the desired ten--minute.
5. Press the MFD Mode button to accept the new ten--minute setting. The minute digit should flash.
6. Press the MFD Set button to select the desired minute.
7. Press the MFD Mode button to accept the new minute setting. The clock should return to normal
operation, and the colon should flash.
To change to the next MFD function, press the MFD Mode button.
Notice
The multi--function display (MFD) clock will not function if the battery voltage drops below 11.5
volts. The clock will reset to 12:00 if the battery is disconnected.