18
2.5.1.
Water massage.
The function of the hydro massage is carried out through the water pumps.
The
key is used for operating the hydro massage. There is a light-emitting diode (LED)
indicating the hydro massage activity next to the key. Pressing
key switches on/off the
hydro massage.
2.5.2.
Air massage.
The
key is used for operating the air massage. There is a light-emitting diode (LED)
indicating the air massage activity next to the key. Pressing the
key switches on/ off the air
massage. Pressing the
key, when the cursor shows
The intensity of the air massage
,
switches on/off the pulsating air massage mode. Switching on the pulsating massage mode is
signaled by the blinking of the diode next to the
key. Switching on the pulsating massage
mode automatically activates the air massage if not switched on already.
In the pulsating massage mode the intensity of the air massage is automatically changed
between a minimum and maximum level. The manual change of the intensity settings of the
air massage is not possible while in the pulsating massage mode. The section
The intensity of
the air massage
(Picture 13) shows the current intensity of the pulsating massage mode.
2.5.3.
Filtration.
Filtration
function is executed by a filtration pump and a water filter. Additionally, a
filtration system is equipped with air ozonator (option) and
flow water heater.
The heater is
protected by a flow sensor to preclude the heater from operation with too low water flow (e.g.
in case of failure of the filtration pump).
The filtration pump is always activated automatically, when water or air massage is turned on.
2.5.3.1.
Filtration programs.
Filtration programs allow to activate the filtration at selected time.
There are two types
of filtration programs: daily (filtration is activated every day at the same time) and weekly
(filtration is activated on a given day of a week at the same time).
Filtartion program setting is as follows. When
button is pushed in,
Menu
will be
displayed on the screen.
Filtration
position shall be selected by
buttons.
Filtration
menu will be displayed on the screen when
button or
button is pushed in.
Daily
position shall be selected by
buttons.
When
button or
button is pushed in,
Daily programs
window will be displayed on the screen. It is possible to set four daily
filtration programs. Cursor position can be changed by
buttons. A value indicated by
the cursor can be changed by
buttons. Pushing in the
button for 1 second minimum
activates its autorepetition. Thus a value can be changed quickly.
button or
button (when a cursor is indicating temperature of the fourth program) or
button (when a cursor is indicating activity marker of the first program) shall be pushed in to
confirm introduced setting and to return to
Filtration
menu.
button shall be pushed in to
cancel introduced setting and to return to the window in a working mode.
shall be
pushed in to exit
Filtration
menu.
,
or
button shall be pushed in to exit
Menu
and to
return to the window in a working mode.
Summary of Contents for Portable SPA Classic
Page 1: ...Portable SPA Classic Operating Instruction...
Page 2: ......
Page 4: ......
Page 27: ...27...