85
Specifications
Tip: Dimensions and specifications may vary with features, options and accessories.
HAMMER
Chassis
Front Suspension Type / Travel
43mm Inverted Telescopic Fork / 5.1 in. (13 cm)
Rear Suspension Type/Travel
Single Monotube Gas / Preload Adjustable
3.9 in. (10 cm) (HAMMER S)
3.0 in. (7.5 cm) (HAMMER 8-BALL)
Swingarm
Forged & Cast Aluminum with Rising Rate Linkage
Front Brakes
Dual (HAMMER S), Single (HAMMER 8-BALL)
300 x 5 mm / Floating Rotor / 4 Piston Calipers
Rear Brakes
Single 300 x 5 mm / Floating Rotor / 2 Piston Caliper
Drive System
Final Drive Type
Carbon Fiber Reinforced Belt
Transmission Type
6 Speed Overdrive / Constant Mesh
Primary Drive
Gear Drive With Torque Compensator
Primary Reduction Ratio
1.49:1
Gear Shift Pattern
1 Down / 5 Up
Internal Gear Ratios
1st Gear
3.13:1
2nd Gear
2.02:1
3rd Gear
1.50:1
4th Gear
1.20:1
5th Gear
1:1
6th Gear (Overdrive)
.87:1
Final Drive Ratio
2.12:1
Clutch Type
Wet Multi-Plate / Diaphragm Spring
Wheels and Tires
Front Wheel Type / Size
Cast 18 x 3.5
Rear Wheel Type / Size
Cast 18 x 8.5
Front Tire Type / Size
Dunlop D418F Elite 3 / 130/70R18 63H Tubeless
Rear Tire Type / Size
Dunlop D419 Elite 3 / 250/40R18 81V Tubeless
Electrical
Alternator
38 amp
Battery
YTX20HL-BS / 12 Volts 18 Amp Hour / 310 CCA
Fuse, Engine / ECM
15 amp
Fuse, Fuel Pump
10 amp
Fuse, Headlight / Brake Light Lamps
20 amp
Fuse, Tail Light Lamps / Flashers /
Indicator Lamps / Horn
15 amp
Fuse, Ignition / Gauges
15 amp
Fuse, Accessory
15 amp
Bulb, Headlight (International)
High H11 / Low H11
Bulb, Position Lamp
12 Volt 5 Watt W5W
Bulb, Taillight
Non-Serviceable LED
Bulb, Turn Signal
R10W / Auto-Cancel System
Bulb, Indicator
Non-serviceable LED
Bulb, License Plate Lamp
5 Watt
