23
Instruments, Features and Controls
Instrument Cluster
Speedometer
The speedometer displays vehicle
speed in either miles per hour (MPH) or
kilometers per hour (km/h).
Indicator Lamps
Lamp
Indicates
Condition
Neutral
This lamp illuminates when the transmission is in neutral and the
ignition key is in the ON position.
High Beam
This lamp illuminates when the headlamp switch is set to high beam.
Turn Signal
The turn signal indicator flashes when the left, right, or both turn sig-
nals (hazard) are active. If a bulb fails, or if there is a short circuit in
the signal system, the lamp flashes at more than twice the normal
rate.
Low Fuel
This lamp illuminates when approximately one gallon (3.8 liters) of
fuel remains in the fuel tank.
Check Engine
This lamp illuminates momentarily when the ignition switch is in the
ON position and the engine is off. This indicates proper function.
This lamp will illuminate if the engine is disabled by the sidestand
interlock switch. See page 30.
The light will also remain on if the tilt sensor shuts down the engine.
See page 43.
If this lamp illuminates while the engine is running, contact an
authorized VICTORY dealer promptly for diagnosis.
If abnormal sensor or engine operation is detected the light will
remain on as long as the fault condition exists. Retrieve the error
codes for diagnosis. See page 27. This lamp is also known as a
malfunction indicator lamp (MIL).
Cruise Control Engaged (if equipped)
Not used
Speedometer
Indicator
Lamps
Multi-Function
Display