74
Cleaning
Matte Clear Coat Finishes
Matte finish products are prone to trapping dirt, oils and other contaminants. Always clean
this type of finish with warm water and a mild dish-washing detergent. Use a soft sponge to
gently rub the surface, then rinse with clean warm water. For stubborn stains such as grease
or oil, use a citrus-based cleaner. Spray the cleaner onto the area and rub gently with a soft
sponge. Allow the cleaner to sit for a couple of minutes, then rinse well with clean warm
water. Repeat as needed.
NOTICE: Never use a polishing/buffing wax or any sponge that has an abrasive surface when
cleaning a matte finish. These products will buff the matte surface of the finish and result in
a glossy finish. Never clean matte finishes with a pressure washer, as this will further imbed
contaminants into the clear coat and may damage labels and decals.
Suede Paint Finishes
If your motorcycle has a suede paint finish, do not use conventional cleaning methods to
clean your motorcycle. Suede paint is different from VICTORY’s usual high-gloss finish.
Like suede fabric, suede paint changes as you interact with the finish. It will change with
time, exposure to elements and use. The quality of the paint is not affected by these changes.
Suede paint cannot be buffed out if it becomes scratched or scuffed. If polished, the finish
will become less flat or matte. This finish cannot be repaired if it receives heavy damage
such as a scratch or chip.
Suede Finish Cleaning
Suede paint should be cleaned and cared for in the following manner:
1. Spray Pure Victory Polish Suede Finish Cleaner (#90949) directly on all the suede body-
work.
2. Using a Pure Victory Polish 100% Microfiber Polishing Towel (#90962), wipe the
cleaner into the surface, then wipe the finish dry using a clean, dry surface of the towel.
3. After you have cleaned and dried your suede bodywork, apply Pure Victory Polish Suede
Finish Protectant (#90950) to maintain and protect the beauty of your VICTORY
motorcycle. Be sure to apply the protectant after every cleaning.
Suede Finish Protectant
1. Spray Pure Victory Polish Suede Finish Protectant (#90950) onto the suede bodywork.
Use a Pure Victory Polish 100% Microfiber Polishing Towel (#90962) or Microfiber
Applicator (#90965) to rub the protectant thoroughly into the surface.
2. Using a clean, dry microfiber towel, wipe the surface to achieve that showroom-new
suede finish.
3. IMPORTANT: Be sure to apply Pure Victory Polish Suede Finish Protectant after every
cleaning.
