41
Operation
The operation section describes how to operate your VICTORY motorcycle to ensure the
best performance and longevity of the engine and other components. Information includes:
Follow all safe riding practices outlined in the safety section. See page 7.
During the first 500 miles (800 km), critical engine parts require special wear-in procedures
so they seat and mate properly. Read, understand and use the following rules for operating
the motorcycle during the first 500 miles (800 km).
NOTICE: Do not put unnecessary load on the engine during the first 500 miles (800 km). Avoid
prolonged full throttle operation or any condition that creates excessive engine heat.
Engine Break-in Period
NOTICE: If engine trouble should occur during the engine break-in period, consult the maintenance
section of the Rider’s Manual, the VICTORY Service Manual, or an authorized VICTORY
dealer immediately.
Failure to perform the initial maintenance as recommended could result in less than
desirable engine performance in the future. Perform the initial maintenance as
recommended.
• Engine Break-in Period
• Fueling and Fill Height
• Starting the Engine
• Shifting Gears
• Accelerating
• Braking
• Stopping the Engine
• Parking
Odometer
Reading
Instructions
Miles
Kilometers
0-90
0-145
Do not operate for extended periods of time at throttle positions above
1/3 throttle. Vary the engine speed frequently. Do not operate for
extended periods of time at any one throttle position.
90-300
145-483
Do not operate for extended periods of time at throttle positions above
1/2 throttle. Vary the engine speed frequently. Do not operate for
extended periods of time at any one throttle position.
300-500
483-800
Do not operate for extended periods of time at throttle positions above
3/4 throttle.
At 500
800
Perform the initial maintenance as described in the maintenance sec-
tion of the rider’s manual. This critical maintenance should be per-
formed by an authorized VICTORY dealer. Initial maintenance includes
servicing all adjustments, tightening all fasteners and changing engine
oil.
