Victory Motorcycles Hammer 8-BALL 2010, User Manual

Page: 115 / 332

113
Maintenance
Seat Removal
WARNING! A loose seat could cause a sudden shift in
riding position, causing loss of control. Always make sure
the seats are securely fastened before riding the
motorcycle.
1. Remove the passenger seat cowl by pulling
directly upward on both sides of the cowl evenly.
2. Remove the (3) socket head seat screws using a
5 mm hexagonal wrench.
3. Lift the rear of the seat and pull rearward to
disengage the tab at the front of the seat.
4. Remove the seat.
Seat Installation
1. Slide the seat tongue into the receiver at the rear of the fuel tank.
2. Align the seat screw holes.
3. Ensure the front seat mount is engaged in the front receiver, then install the screws.
Torque: 57 in. lbs. (6.8 Nm)
4. Reinstall the passenger seat cowl.
Seat Screws