Victoria-05 Vittoria B Series, Instructions For Installation And Operation Manual, Page: 4 / 21

4

Durring the stove is in operation, the exhaust pipes and door become very hot .

Do not place anything that is not heat resistant near the stove .

NEVER use liquid fuel to ignite the stove or rekindle the embers

Do not obstruct the external air inlets in the room where the stove is installed, or those of the stove itself.

Do not wet the stove and do not go near electrical parts with wet hands .

Do not use reducers on the smoke exhaust pipes

The stove must be installed in a room that is suitable for fire prevention and equipped with all that is
required (power and air supply and outlets) for the stove to function correctly and safely
.

The stove must be kept in a room where the temperature is above 0 °C .

Use appropriate anti-freeze additives for the water of the system .

Ensure that the temperature of the return water is at least 45 °C .

The identification label can be found at the back of the stove.

Keep these instructions, the guarantee booklet and receipt of purchase, as they must be used when
requesting information.
If ignition fail, DO NOT re-ignite until you have emptied the combustion chamber .
ATTENTION: THE PELLETS EMPTIED FROM THE COMBUSTION CHAMBER MUST NOT BE DEPOSITED INSIDE THE HOPPER
3.Technical parameters:
Picture 1
А- Air intake Ø5см
В- Coupling RS 232
С- Smoke outlet Ø8см
D- ON/OFF switch with electric socket
.
E- Water pump
F- Inlet cold water- G ¾ ‘’
G- Outlet hot water- G ¾ ‘’
H- Outlet pipe of the safety valve - G ½ ‘’
I- Button /with safety cover/ for thermostat reset