background image

13

 

 

When the stove is operational by pressing button 0/1 for 2 seconds, the process for shutting down the stove is 
started and OFF is displayed for 10 minutes. Shutdown phase includes: 
-

 

Pellet feeding is stopped. 

-

 

Stopping the circulation of the water.  

Never pull off the plug during shutdown process!  
Please have a note that the circulation pump will work till the temperature of the water drops under 40

o

C. 

 

Setting the clock: 
Press “MENU” button for 2 seconds and use +/- buttons to follow the instructions shown on the display. Access 
clock menu. This menu will allow you to change and set the time. After that press “MENU” and the following 
information will appear, and can be adjusted: day, month, year, hour, minutes, day of the week. When “Save?” 
appears, you can chesk  is everything entered correctly  before  confirming. Press “MENU” to confirm and save 
the information („Save OK „ is show on the display). 

 

Programming for igniting and shutting down of the stove at different time in the week. 
Press “MENU” for 2 seconds, to enter in time setting menu and press + button to enter in weekly timer function. 
“Program  ON  /OFF”  ще  will  appear  on  the  display.  This  timer  allows  you  to  set  number  of  ignitions  and 
shutdowns  per  day  (up to  three)  for each  day of the  week.  After  confirming with “MENU”  button one  of  the 
following options will appear: 
-

 

No Prog. (no program is set); 

-

 

Program/daily (a single program is set for every day) 

-

 

Program/weekly (a program is set for each day of the week.) 

 

You can change to every menu by pr/- buttons.  
Press “MENU” to confirm “Daily Program” and access to few programs (ignition/shutdown) to be set per day. 
Use Program/daily option to set the same program for each day of the week. 
The following will appear on the display if + is pressed: 
-

 

No Prog. 

-

 

Prog. No 1 (one ignition and shutdown per day) Prog. No2 (same as before) 

Prog. No3 (same as before) 
Use  the  button  to  show  them  in  reverse  order.  If  you  choose  the  first  program  the  time  of  ignition  will  be 
shown.  
The display shows: 1 ignition hour 10:30; use the +/- buttons to change the hour and press “MENU” to confirm. 
The  display shows: 1 ignition minutes 10:30  use  the +/-  buttons to change the minutes and press “MENU” to 
confirm 
Shutdown time is set by the same way.  
The programs are set and by pressing “MENU” button when “Save” is shown on the display.  
To confirm program Program/week you need to choose the day to which the program apply.  
1 Mon, 2 Tues, 3 Wed, 4 Thurs, 5 Fri, 6 Sat, 7 Sun 
When you have chosen the day by pr/- buttons, press “MENU” to confirm and continue with the settings 
in the same way as for Program/daily, 

selecting whether or not to enable a program for each day of the week 

and choosing the number and times of interventions.

 
If  you made  a mistake  during  programming  you  can exit  without  confirming  the  settings  by  pressing  0/1  and 
Save will be shown on the display. 
 
If the stove runs out of pellets the stove will block and Stop/Flame will be shown on the display. 
 
Pellet reserve warning. 
The  stove  is  equipped  with  electronic  system  to  monitor  the  pellets.  The  system  is  integrated  in  the  control 
module, which allows the stove to monitor how many pellets are left in the hopper. While the stove is working 
the check up is made constantly.  
For proper work of the system it is important to follow the procedures during first ignite (made by the dealer). 
Before  the system for monitoring start  working, you have  to load and use  full  stack of pellets. This will allow 
brief running of the loading system. Subsequently load 15 kg pellets. 
 
Then press once the “reserve” button to confirm and save in the memory that you have load 15 kg pellets in the 
hopper. 
 

Summary of Contents for Vittoria B Series






















Reviews: