14
From this moment the display will show the remaining quantity of the pellets in kg. (15 … 14 … 13). Every time
when pellets are loaded you must enter the quantity. When loaded 15 kg. just press “pellet load” button. For
different quantity or if there is a mistake, you can specify the quantity by using the menu as follows:
Press “MENU” for 2 seconds to view the Settings
Use + or – to reach T.Max exit
Confirm by pressing “MENU” button and the remaining quantity with pellets will be shown on the d what have been
loaded.
If the hopper is left without pellets, the stove will block and “Stop/ Flame” will appear.
14.Maintenance:
Before any maintenance procedure, disconnect the electric supply.
Remember, that is very important to vacuum the combustion chamber before every ignition.
If by any reason the ignition fail, do not restart until you empty the combustion chamber.
Warning: pellets which are removed from the combustion chamber must not be returned to the hopper.
For the proper work of the stove, regular maintain is required.
The stove will show the following message „smoke ˚C /high” or “Maintain” when it is needed cleaning. This is
preceded by “Clean exchang” message on the display.
If regular maintenance is not performed and at least once a season don’t make a complete cleaning, could cause
to poor functionality. Any problems resulting from lack of maintenance will immediately void the warranty.
Daily maintenance:
The cleaning must be performed with vacuum cleaner when the stove is completely cold. The whole procedure
takes only few minutes.
The cleaning rods (elements) must be moved once a day with the help of handle.. This will help to save fuel. The
handle is located in the top side near the pellet tank – Picture 6. Use glove during operation.
Picture 6 Picture 7 Picture 8 Picture 9
Operations which must be made when the stove is cold:
-
Open the fire door and clean the ash from the ash pit. (Picture 7);
-
Remove the combustion chamber or use spatula to scrape it and clean any blocked holes Picture 8;
-
Vacuum the combustion chamber and clean the contact edges.
-
When cold clean the glass if necessary.
Never vacuum hot ash or pellets. Failure to do that will cause damage to the vacuum cleaner.
Weekly maintenance:
-
Empty the hopper and use vacuum cleaner to clean it when the stove is not been used for a long
period of time or when it is used once every 15 days.
-
Clean the heating element – Picture 9.
Cleaning of the smoke duct:
When the stove is not in operation and cold move the cleaning rods energetically (Picture 6); open the left and
right service openings (Picture 10 and 11) and clean with vacuum cleaner.
