12.2018
INSTRUCTION MANUAL for installation and operation of pellet stove VITTORIA 8 / VITTORIA 10
11
10.2.3. Main menu.
Air correction
±15% sets in percentage the
adjustment of the power of
the
smoke
fan
during
operation mode and the
pause length of the feed
screw.
Pellet correction
±15%
Power limitP3,P2,P1
Sets the operation level of
the system.
Monitors the current values measured by the sensors.
Smoke gases: in green is indicated the temperature when
the stove going from igniting to warm up mode. It is set
from Ignition/Flame sensor. In red is indicated the
temperature when the fan will start blowing air in the
room. In the Blowing/Hysteresis menu can be added
additional hysteresis.
Pressure: indicates is there any pressure switch
connected to the system. (0) indicates for activated
pressure switch. If the value of the parameter is 700+ this
is indicating open (non-active) pressure switch.
Intermediate clean: indicates the time left before the
system starts cleaning mode. Recommended value 600.
Pellets: indicates the
volume of the pellets
used
during
operation
mode.
Input value is gr/min.
Delayed start or stop of the
system.
By touching the timer icon,
there is possibility to choose
from 3 types of timers.
-with M, T, W, T, F, S, S are determinate the days of the week. Respectively
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday. If no box
is marked the timer is off. For example if boxes Monday, Wednesday and
Friday are marked the stove will start or stop in the indicated days.
Starting timer: marked in green. Each step is 30 minutes.
Stopping timer: marked in red. Each step is 30 minutes.
Important!!! There are two additional safety features:
- first: the software will automatically delay the stopping timer with 30
minutes when there is attempt to input the same values for both timers.;
- second: the software will automatically select the starting timer if there is
attempt to input the same value for starting and stopping from two different timers in order to avoid conflicts.
