30
Figure 2.7.2 Five and a half digits duty cycle measurement terminal connection
5.8 Square wave output
Press
AC+DC
to turn on the square wave output function and the mark of square
wave (SWave) will appear in the measurement configuration bar. When it is turned on, the
square wave is output directly. In this case, the screen displays the square wave output
frequency, and the default frequency is 1kHz, as shown in Figure 2.8.1.
0,001,000
AUTO
Hz
Local
OUTPUT
Square
Figure 2.8.1 Square wave interface with a default output frequency of 1kHz
Square wave output frequency can be set by users, and the method is as follows:
When the frequency is set, the adjustment position default is the lowest level, and the
selected location has a crossbar below, shown in figure 2.8.2;
