32
terminal
on the back panel.
Press
SHIFT
+
EXIT
SYS
to exit the square wave output interface to the interface of
last measurement. For example, after the DC voltage is measured shown in figure 2.8.5.
Press the square wave enter key to enter into the interface in figure 2.8.1 to change the
output frequency of the square wave again or turn off the square wave output. Press
SHIFT
+
EXIT
SYS
to turn off the square wave output, shown in figure 2.8.6.
DCV
1.99999
AUTO
V
100
%
AUTO 2V
AUTO TRI
Slow
Local
Wav
e
Figure 2.8.5 Switch from the interface of square wave output to that after the
measurement of DC voltage
DCV
1.99999
AUTO
V
100
%
AUTO 2V
AUTO TRI
Slow
Local
Figure 2.8.6 The interface of the latest measurement function after exiting from
the square wave output
