24
Ω
099.997
AUTO
Ω
100%
AUTO
200Ω
AUTO TRI
Slow
Local
图
2.3.1
二线电阻测量界面
Figure 2.3.1 2-wire resistance measurement interface
Notes: the measured voltage value is shown on the main display, and the value on
the secondary screen represents the ratio of the current measured value and the full
range.
2. According to Figure 2.3.2, connect the red and black test leads respectively to the
proper input terminals.
3. Probe the test points and read the display.
Figure 2.3.2 2W resistance measurement terminal connection
5.3.2 4-wire resistance measurement
1. When in the mode of 2-wire resistance measurement, press
2W 4W
Ω
again to
select four-wire resistance measurement. The four-wire resistance measurement interface
is shown in Figure 2.3.3:
