VE46 Pipe Roll Grooving Tool
9
POWER DRIVE MOUNTING
PLATE KIT INSTALLATION
1.
Install the drive shaft/drive-adapter
assembly onto the end of the lower shaft, as
shown above.
NOTE:
Make sure the holes in
the drive shaft/drive-adapter assembly align
with the holes in the inner grooving roll shaft.
2.
Insert the hex-head bolt through the
holes in drive shaft/drive-adapter assembly
and inner grooving roll shaft. Thread the hex
nut with nylon insert onto the end of the hex-
head bolt, as shown above.
3.
Tighten the hex nut with nylon insert to
secure the drive shaft/drive-adapter assem-
bly to the inner grooving roll shaft.
TM-VE46 1924 Rev_B.fm Page 9 Wednesday, January 19, 2005 8:59 AM
