5
ATTACHING THE VACUUM BAG
1
Place the bottom of the bag frame in the supports on the rear of the chassis.
2
Depress and hold the bag latch trigger in the bag handle to retract the bag latch.
3
Pivot the bag frame into position.
4
Release the bag latch trigger to engage the bag latch.
5
Unclip the locking collar from the bottom of the main handle and slide it down the handle
tube. Clip the locking collar to the top of the bag frame to lock in position.
FITTING THE HANDLE
1 Remove the two handle mounting
screws from their position in
the chassis using the supplied
screwdriver.
2 Insert the handle tube & power cable
into chassis as shown.
3 Fasten the handle fi rmly in position
by re-inserting the two screws
and tightening using the supplied
screwdriver.
NOTE: DO NOT OVER TIGHTEN
TAKE CARE NOT TO DAMAGE
THE POWER CABLE
Handle Mounting Screw x 2
Chassis
Bag Frame
Bag Frame Handle
Power Cable
Locking
Collar
Bag Latch
Trigger
Not
for
Reproduction
