8
UNBLOCKING THE BLOW TUBE
In the event that the blowing tube or nozzle
becomes blocked, follow these instructions
for unblocking:
1
Switch the Vac & Blow off at the handle,
switch off at the power point and unplug
the lead.
2
Remove the two screws located beneath
the blowing nozzle.
3
Rotate the nozzle and tube upwards, as
shown, to disengage the bayonet fi tting
at the Blow/Vac function switch.
4
Pull the nozzle and tube away from the
Blow/Vac function switch as shown.
5
Clear the blockage. A flexible hose can
be used to push out any material that is
blocking the tube.
6 Re-assembly is reverse of disassembly.
3
4
c
a
v
&
w
o
l
b
5
2
Screws x 2
MAINTENANCE
& HELPFUL TIPS
NEVER OPERATE YOUR VAC & BLOW
WITH THE BLOW TUBE REMOVED
Not
for
Reproduction
