TABLE A-l
SLIDE SWITCH SW5 SETTINGS
System
CPU
Module
Standard
l-256
AL1
Full
300X-AC-F
l-512
AL1
l-512
AL1
Expanded
300X-AC-F
513-1024
AL2
1.
2.
3.
Place the module on a static-free work surface with
the component side up.
Locate the appropriate slot (Table A-2 and
Figure A-2). Align the circuit card with the circuit
card guides on each side of the slot. Slide the card
into the slot using firm, steady pressure to seat it in
the backplane connectors.
Align the filler panel bar with the lower edge of its
card. The captive screws align with oversized holes
in the card and threaded holes in the card cage.
Hand tighten the captive screws with a screw-
driver. Take care to avoid cross-threading the
screws.
CPU 1
CPU 2
CPU 3
CPU 4
CPU 5
Figure A-2
Card Cage Positions
TABLE A-2
RECOMMENDED
CARD CAGE LOCATIONS
card
Global Memory Card
CPU1
System Supervisor CPU
Number
CPU3
CPU4
Video Switcher CPU
Alarm Control CPU
CPU
VI 300X-TC-S
CPU5
Alarm Control CPU
I
X820-792
A-2