Use the right and left arrows to select the desired baud rate and
press ENTER to fix the rate in memory.
To abort, press ESC.
Selection:
2400, 4800, 9600, 19,200 baud
3.3.6 DIAGNOSTIC FUNCTIONS
A variety of diagnostic functions may be executed with standard
remote video switcher software.
Since there are no
serviceable parts in the remote video switching unit, it is
necessary to contact the
Technical Support Group or Service
Department if a test indicates a malfunction.
To perform any of the diagnostic functions, select RUN DIAGNOSTICS
from the Master Menu (3).
Master menu
Run diagnostics menu
The following warning will be displayed:
Menu 19
SYSTEM DIAGNOSTICS
--------------------
WARNING
THIS UNIT WILL GO
OFF-LINE WHILE IN
DIAGNOSTICS MODE
--------------------
PRESS (CR) TO BEGIN
PRESS (ESC) TO ABORT
Pressing ENTER displays the diagnostics submenu:
Menu 20
DIAGNOSTICS
PORT TESTS
VIDEO PORT TEST
SERIAL PORT TEST
MEMORY TESTS
CPU RESET TEST
SET DEFAULTS
USE:
Use the up and down arrow keys to move the cursor.
Press ENTER to
select a function, or press ESC to exit.
Page 18
3
Remote Switcher Programming
27 May 92
