It is possible that all inputs to the terminal remote unit (see
Remote Unit RVS 6 in Figure 3-1) may be combiner inputs.
In this
case, the first
combiner card, with inputs numbered 1 through
8, is assigned camera numbers 1 through 135, which are the combined
outputs from Remote Units RVS 1 and 2.
Combiner card 2 (inputs
numbered 9 through 16) is assigned the camera numbers from Remote
Unit RVS 3, numbers 136 through 170, and so on until all camera
inputs into all remote switcher units have been programmed into the
terminal remote unit.
When all matrix input programming is complete for a remote unit,
select STORE MATRIX DATA and press ENTER.
The following screen will
be displayed:
Menu 16
MATRIX INPUTS
-------------
MATRIX DATA STORE
IN PROGRESS
PROGRAMMING: 050000
THE SYSTEM WILL
RESET WHEN COMPLETED
3.3.4 ASSIGNING ALARM INPUTS TO REMOTE UNITS
Remote video switching units may have provision for alarm signal
inputs via X-IA alarm interface units.
The X-IA inputs are assigned
numbers beginning with 1 at each remote video switcher unit, but
alarm numbers are assigned serially for the entire system.
This is
similar to the assignment of camera numbers to matrix input numbers
described in section 3.3.3.
To display the programming screen for this function, select SET
ALARM INPUTS from the Master Menu (3).
screen will be displayed,
The following programming
Menu path:
Master menu
Set alarm inputs menu
Menu 17
XIA INPUT: ALARM NO.
--------------------
001
002 : 0002
003 : 0003
004 : 0004
005 : 0005
006 : 0006
007 : 0007
Page 15
3
Remote Switcher Programming
27 May 92
