22
•
Chapter 7 – Technical Information
XX176-00-00 Rev 507 VNCTRL-1 Remote Control Panel
Chapter 7 – Technical Information
Table 7-1: Technical Information
Input Voltage
120 VAC, 50/60 Hz nominal
NOTE:
Vicon recommends the use of uninterruptible power supply systems (UPS) to prevent
voltage fluctuations that can affect operation and cause damage to the equipment.
Current
0.5 A
Power Consumption
Less than 6 W
Heat Equivalent
0.3 btu/min (0.09 kg-cal/min)
NOTE:
These figures represent the conversion of 100% of the electrical energy to heat. Actual
percentage of the heat generated will be less and will vary from product to product. These
figures are provided as an aid in determining the extent of cooling required for an installation.
Fuse
20 mm, 0.25A, slo blo, 250 V, HRC
Radio-Frequency
Emission Standard
FCC Class A
Indicators and
Connectors
Front Panel:
Status Indicator:
Green LED, On Line; Red LED, Fail
Record Indicator:
Red LED (ON)
Copy Indicator:
Amber LED (ON)
Mute Indicator:
Amber LED (ON)
Rear Panel:
Power Connector:
3-conductor female socket
Relay:
3-pin screw terminal block, N.O./N.C.
RS-422/RS-485:
9-pin D-shell (requires V422-CONV for RS-232 connection to DVR/NVR)
2-Pin Terminal Block:
For future use
Internal:
DIP Switch:
SW1 for addressing/audible indicators/test mode; SW2 for setting baud rate
Processor Indicator:
Yellow LED on the
Main PCB indicates the processor is operating
properly
Mounting
Rack-mount or desk-top
Dimensions Height:
1.3 in. (33 mm),
Width:
19 in. (483 mm),
Depth:
9.85 in. (250 mm)
Weight
5.6 lb (2.5 kg)
Operating
Temperature Range
32 to 122° F (0 to +50° C)
Humidity
Up to 95% relative, noncondensing
Summary of Contents for VNCTRL-1
Page 2: ......
