6
•
Chapter 1 - Introduction
XX176-00-00 Rev 507 VNCTRL-1 Remote Control Panel
Accessory Kit
The provided accessory kit contains necessary items needed to install and wire the remote control panel
during installation. A V422-CONV (product code 6649-10) is required for RS-232 connection to the DVR/NVR.
Table 1-1: Accessory Kit
Part Description
Installation and Operation Manual
Provides instructions on installation, configuration and operation.
Line cord
Provides power to the unit.
9-pin D-shell adapter
Used to adapt the 9-pin connector to a terminal block connector
9-pin D-shell gender changer
Used to change rear panel 9-pin female connector to a male connector
Unpacking and Inspection
All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to
provide suitable delivery.
Inspect the cartons upon delivery and, if damage is present, make detailed notes on the carrier’s bill. Then,
obtain the carrier agent’s signature and file a damage claim as soon as possible.
Open the cartons and inspect the equipment for damage. Save the cartons and packing material. If damage is
present, contact the carrier and file a damage claim immediately. If the equipment must be returned for repair,
follow the instructions in
Shipping Instructions
.
Summary of Contents for VNCTRL-1
Page 2: ......