16
|
ViconNet VN-NVR Shadow Installation and Configuration Guide
Note
Licensing is done through Vicon’s website. On
www.vicon-security.com
, go to
the Support tab and select Software Registration and follow those
instructions. Be sure to have the License ID and password that is on the label
of the software CD jewel case. You will need these to register. Follow the
prompts.
4. Enter the six license numbers generated from the registration process into
the six License Number fields of the
Registration
window, and click
The application automatically restarts in order to implement the
new registration and enable the functionality of your purchased application.
Connecting to the Network
Next the VN-NVR Shadow has to be added to the network. In this step, you
will configure the IP address of this site in the network.
1. Go to the VN-NVR Shadow to set the IP address. Then, from the ViconNet
Main
window, click . The
Setup Site Selection
window is
displayed, showing a list of all currently connected transmitters and
Workstations.
2. Select the VN-NVR Shadow to configure the network setup and click
. The
System Settings
window is displayed, as previously shown.
3. Click
. The
Network Settings
window is displayed.
