ViconNet VN-NVR Shadow Installation and Configuration Guide
|
13
Using ViconNet
The NVR Shadow is delivered with the ViconNet application preloaded.
Accessing the Configuration Functions
The configuration functions are performed via the
System Settings
window
applicable to a selected site. The Shadow must first be registered before the
storage database drives can be configured.
To access the System Settings window:
1. From the ViconNet
Main
window, click . The
Setup Site
Selection
window is displayed:
The local site always appears at the top of the list. The Nucleus site is listed
second, displayed as
(Nucleus)
.
The
Exit to O.S.
button enables you to exit to the Operating System and to
close the ViconNet application.
Note
There is a limit to the amount of time you can leave the setup screen open
without working in it. Therefore it is important to save your settings each time
you make a change. Before ViconNet will shutdown in this situation, the
following warning screen will display.