MAIN MENU
1
and ENTER.
DISPLAY
1
Sets
the
display format of the date
and present time on the monitor.
2 TIME DATE SEARCH
Sets the date,
time and direction to search for the desired
pat-t of a tape.
3
TIMER PROGRAM
Sets the
timer recording.
4 RECORDING SET UP
Sets the alarm recording mode, alarm recording duration and emergency recording.
5 REAR TERMINAL
Sets the frequency division ratio of CLOCK OUT, output signal of the CALL OUT
terminal and the MODE OUT terminal, etc.
6 MAINTENANCE
Displays the power loss list, alarm loss list and initializes all menu settings. Clears
the
loss list and alarm list.
7 FIRST TIME SET UP
Set up for when the end of the tape is reached, quasi v-sync, present time
and
communications parameters of the optional
interface.
1
THE DISPLAY MODE (DISPLAY MODE)
DISPLAY
MODE 1:
Displays date and present time. (Refer to page 12.)
DISPLAY MODE 2:
Displays date, day of the week, present time and recording mode.
(Refer to page 12.)
DISPLAY MODE 3:
Displays nothing;
until an alarm recording starts, then date, alarm
recording number, etc. is displayed.
DISPLAY MODE 4:
Displays nothing; even in the case of alarm recording,
nothing is
displayed on the monitor.
l
During an alarm recording, alarm recording number is displayed if the “DISPLAY MODE” is
I
set from to 3.
2
SETTING THE
SIZE OF THE LETTERS OF DAY AND PRESENT TIME DISPLAY
(TIME DATE SIZE)
SMALL:
The size of the letters becomes small.
L A R G E :
The
size of the letters becomes large.
Turn the JOG dial to set the day of the month to search for.
3
THE DIRECTION
Sets the date,
time
and direction to search for the desired location
on
a
tape.
1
THE TIME
Turn the
JOG
dial
to set the hour and minute to search for.
2
DATE
Turn the JOG dial to select the starting direction for search.
FORWARD:
Search in the forward direction.
REVERSE:
Search in the reverse direction.
l
If the desired part of a tape is not found in one direction, the VCR automatically searches in the
opposite direction.
After the setting, turn the SHUTTLE
ring to the right to start searching.
l
An hour index mark is written on the tape on the hour and is used as a reference in the ‘search function. Because of this, a
recorded tape must pass a time clock hour mark before this function can work. The TIME DATE SEARCH function begins
after
the first hour index mark.
Example 1:
VCR
is set to record from
to
Times from 9:00 to
can be found.
Example 2:
VCR is set to record in one speed from 7:00 to
then in another speed until 18:OO.
-Times from 7:00 to
and 15:00 to
are accurately located.
Time date search function is not available for a tape recorded by any other VCR than this model.
If recording quality is poor, the VCR may fail to locate the desired part of the tape during time date search.
Refer
to page 19 “TIMER RECORDING” for details.
