3. Connecting to a personal computer
The commands sent from the personal computer (or other equipment) to the VCR
and
responses
produced by the VCR are detailed in this section.
q
When
only one VCR via the personal computer, the “VCR ADDRESS” is set to “NONE”.
(Refer to page 2, item 7.)
1. Command:
Commands sent to the VCR.
Format:
2.
Status:
Response codes from the VCR.
Format:
Note)
When you set
to “CR”, input the carriage return code (OOH).
When you set
to
input the carriage return code (ODH) and line
feed code
(OAH).
When you set
to “CR”, the carriage return
code
(ODH) will be inputted.
When you set
to “CR
l
the carriage return code (ODH) and line feed code (OAH) will
be inputted.
(Example
Switch on the VCR. (When the
and
of the
2326 menu is set to CR.)
Sending commands
Status
or error code from the
from the PC etc.
VCR to PC etc.
Meaning
Power ON command
Command received
Command carried out
l
which indicates carriage return code (ODH).
[Example
Recording was attempted, but could not because the erasure prevention tab of the tape was broken.
(When the
and
of the RS-232C menu is set to CR.)
Sending commands
Status or error code from the
from the PC etc.
VCR to PC etc.
Meaning
Command for recording
Command received
Failed because the erasure prevention
.
tab of the tape is broken.
l
which indicates carriage return code (ODH).
