recording
used to activate more rapid recording when the VCR is recording in one of the Time Lapse modes. Alarm
for more pictures during the alarm duration. Emergency recording enables alarm recording even if the VCR is off, stopped or
in timer recording/stand-by. You should set the alarm recording mode with the “RECORDING SET UP” menu before alarm recording is
used.
Press the DISPLAY button to display MAIN MENU on the monitor.
q
Turn the JOG dial to select “RECORDING SET UP”
and turn the SHUTTLE ring to the right.
l
“RECORDING SET UP” menu will appear.
q
Turn the JOG dial to
REC MODE” and
turn the
ring to the right.
q
Turn the JOG dial to set the alarm recording mode
and turn the SHUTTLE ring to the right.
Turn the JOG dial to select
REC DURATION” and
turn the SHUTTLE ring to the right.
q
Turn the JOG dial to set the alarm recording
(from 15 seconds to 10 minutes or manual
(MAN1 or 2). Turn the
ring to the right.
l
If the “ALARM REC DURATION” is set to “MAN1 alarm recording will continue until a signal
is applied to the RST (RESET) IN terminal. If the signal applied to the RST (RESET) IN
terminal is within the first 15 seconds of alarm recording, alarm recording will continue for 15
seconds then stop.
l
If the “ALARM REC DURATION” is set to
alarm recording will continue until the
signal applied to the SET IN terminal is removed. If the signal applied to the SET IN terminal
is removed within 15 seconds of the start of alarm recording, alarm recording will continue for
15 seconds then stop.
l
The internal time clock can be adjusted if a signal is applied to the RST (RESET) IN terminal
on the rear panel when the “ALARM REC DURATION” is set to other than “MAN1
q
the JOG dial to select “EMERGENCY RECORDING” and turn the SHUTTLE ring to the
l
the JOG dial to select “ON.’
q
Press the DISPLAY button.
The present time display will appear.
SET UP
REAR TERMINAL
MAINTENANCE
FIRST TIME SET UP
lo exit.
S E T
REC MODE
ALARM REC
EMERGENCY REC
S E T
ALARM REC MODE
ALARM REC
D
EMERGENCY REC
O N
n
During alarm recording, the alarm recording count will automatically be displayed except when DISPLAY mode
is selected.
l
The alarm recording count display counts up to 9999 alarm recordings and then it is reset to 0000 and continues counting.
l
When initializing the alarm recording list, the alarm recording count display will be reset.
l
The alarm indicator flashes during alarm recording and lights up when the alarm recording is finished.
l
When the alarm recording is finished, the VCR resumes recording in the same record modes as before the alarm recording.
l
If any of the menus are being set, and a
signal is applied to the SET IN terminal, alarm recording will begin and the
menu being set will disappear off the screen.
If a set signal is applied during alarm recording, a new alarm recording will start with the new set signal. Should one SET signal
be applied within 15 seconds of another, the later
signal will be ignored and a new alarm recording will not take place.
l
Alarm recording will continue for the duration of time which has been set in the
REC DURATION” menu, even if a timer
recording has reached its end time.
Alarm recording stops when the end of the tape is reached.
Emergency alarm recording can start recording when an alarm is triggered even if the VCR is off, stopped or in timer recording/stand-
by. Turn the JOG dial to select “EMERGENCY RECORDING” and turn the SHUTTLE ring to the right.
Turn the JOG dial to select “ON” to
emergency recording, or “OFF to disable it.
.
lights up on the fluorescent display when the “EMERGENCY
of the “RECORDING SET UP” menu is set to “ON.”
2 2