14
Shift Key + Numeric 11 : 8 screen display
Shift Key + Numeric 12 : 7 screen display
Shift Key + Numeric 13 : 9 screen display
7. Video Trigger Operation Mode
Recording begins when a video trigger signal is raised by a VEXT (clock) input signal in time-lapse VCR
operation mode. Performance in this mode is better at capturing the picture than operation without this signal
because there is less error rate.
To use the trigger operation mode,
TRIG OUT
must be set to
LOW
and
REC MODE
must be set to
TIME
LAPSE
. This setting does not recognize Video Loss as an alarm condition.
REC OUT Trigger Operation Mode
When an alarm occurs, this signals the VCR to record.
Trigger connection on rear panel of V5160MUX:
Alarm In / Out
Pin No. Signal Pin No. Signal
1 Alarm 16 in 14 Alarm 3 in
2 Alarm 15 in 15 Alarm 2 in
3 Alarm 14 in 16 Alarm 1 in
4 Alarm 13 in 17 NO
5 Alarm 12 in 18 COM
6 Alarm 11 in 19 NC
7 Alarm 10 in 20 GND
8 Alarm 9 in 21 GND
9 Alarm 8 in 22 GND
10 Alarm 7 in 23 GND
11 Alarm 6 in 24 GND
12 Alarm 5 in 25 GND
13 Alarm 4 in
Trig In/Out
Pin No. Signal
1 Trigger In (VEXT/VCR Clock Out)
2 GND
3
Trig Out (TTL to VCR to VCR Alarm Input)
Shift +1
Shift +2
Shift +3
Shift +4
Shift +5
Shift +6
Shift +7
Shift +8
Shift +9
Shift +10
Shift +11
Shift +12
Shift +13
