5
5.1.4 Time Set
l
Press the
(+)
and
(-)
key to establish the necessary digit.
l
Press the
◁
and
▷
keys to move the cursor to required position.
l
Press the
MENU
key to exit the menu.
5.2 Camera Titles
Select
CAMERA TITLES
screen and press the
ENTER
key. The following menu is displayed:
l
Press the
△
and
▽
keys to move the cursor to required camera.
l
Press
◁
and
▷
to highlight the character.
l
Select the camera title, using the
(+)
and
(-)
keys to select the desired character up to a max. 7 characters.
Choose from the following for each of the characters:
Alphabet (26 letters), Number (0~9), Special Characters ( [.],[,],[:],[+],[-],[*],[/],[(),[]],[?],[ ]).
l
Press the
MENU
key to exit the menu.
l
Note: To retain all titling (camera and alarm), the tape must be played back on the same V5160MUX it was
recorded on.
5.3 Dwell Setup
This menu allows you to adjust the dwell times of the 16 camera video displays.
l
Select
DWELL SETUP
and press the
ENTER
key. The following menu is displayed:
l
Press the
△
and
▽
keys to move the cursor to required camera.
l
Press the
(+)
or
(-)
key to adjust the dwell time. Dwell times may be programmed from
SKIP
to
99
seconds.
A setting of “
SKIP
” removes the channel from the sequence.
l
Press the
MENU
key to exit the menu.
5.4 Alarm Setup
The
ALARM SETUP
menu allows you to set the alarm options for each of the video inputs. The alarm can be
set for titling on or off, dwell time, polarity and video loss. The unit can also have the audio beeper set to on or off.
l
Select
ALARM SETUP
and press the
ENTER
key. The following menu is displayed:
CAMERA TITLES
CAMERA 01 = CH01
CAMERA 02 = CH02
CAMERA 03 = CH03
CAMERA 16 = CH16
DWELL SETUP
CAMERA 01 = 5SEC
CAMERA 02 = 5SEC
CAMERA 03 = 5SEC
CAMERA 16 = 5SEC
SPLIT 4X4 = 5SEC
