7
5.4.3 VD Loss Alarm Setup
The
VIDEO LOSS ALARM
function enables you to define if an alarm is generated when any of the video inputs
is lost/not detected.
l
Select
VD LOSS ALARM SETUP
and press the
ENTER
key. The following menu is displayed:
l
Press the
△
or
▽
key to move the cursor to the required camera.
l
Press the (+) and (-) keys to toggle
ON
or
OFF.
l
Press the
MENU
key to exit screen.
5.4.4 Dwell Time Setup
The
DWELL TIME
function allows you to set the automatic reset period after an alarm is generated
.
l
Select
DWELL TIME
on
ALARM SETUP
menu. The time is highlighted.
l
Press the (+) or (-) key to adjust the time. The options are:
1-99 SEC
: automatic reset period
HOLD
: alarm continues until the alarm camera key is pressed followed by the
ALARM
key
FOLLOW
: alarm continues during the period of input and will go off automatically
l
Press the
MENU
key to exit screen.
5.4.5
Buzzer Out
The
BUZZER OUT
function allows you to enable or disable an audible alarm.
l
Select
BUZZER OUT
on the
ALARM SETUP
screen.
ON
or
OFF
is highlighted.
l
Press the
(+)
and
(-)
key to toggle
ON
or
OFF
.
l
Press the
MENU
key to exit screen.
5.4.6
Relay Out
The
RELAY OUT
function allows you to turn the relay out
ON
or
OFF
to respond to an alarm or video loss.
l
Select
RELAY OUT
from the
ALARM SETUP
screen.
ON
or
OFF
is highlighted.
l
Press the
(+)
and
(-)
key to toggle
ON
or
OFF
.
l
Press the
MENU
key to exit screen.
5.4.7
Trig Out
The
TRIG OUT
function respo nds to an alarm input. The unit allows you to turn the TTL (standard 5V level)
level
HIGH
or
LOW
(
TRIG OUT
does not respond to video loss)
.
l
Select
TRIG OUT
from the
ALARM SETUP
screen.
HIGH
or
LOW
is highlighted.
l
Press the
(+)
and
(-)
key to toggle
HIGH
or
LOW
.
l
Press the
MENU
key to exit screen.
Note: The
TRIG OUT
is tied to the VCR alarm input. The signals (
HIGH or LOW
) must match the signals
on the equipment (i.e., VCR) it is hooked up to.
5.5
Record Setup
The
RECORD SETUP
defines how the unit’s video output to the time lapse VCR is recorded.
l
Select
RECORD SETUP
and press the
ENTER
key. The following menu is displayed:
VD LOSS ALARM SETUP
CAMERA 01 = ON
CAMERA 16 = ON
