XX017-01-00 Rev 702 V1400X-IDL Intelligent Distribution Line Control
Installation
••••
11
RJ-45 Connector Applications
(Surveyor2000)
For RJ-45 connector applications, connect the 6
dressed wires from the other end of the Station 1 (J1)
cable to the RJ-45 Termination Box screw terminals.
From here, use the provided RJ-45-to-RJ-45 6-foot
cable to connect between the Termination Box and
the RJ-45 connector on the appropriate device.
1. Fabricate the cable as described above. Connect
the 6 dressed wires to the RJ-45 Termination
Box.
2. Connect the Receiver (RJ-45 connector) end of
the 6-foot cable to the appropriate connector as
shown in Figure 13.
3. Connect the other end of the 6-foot cable (RJ-45
connector) to the Termination Box.
4. (Optional) Connect a daisy-chained Receiver as
described in the corresponding Vicon Receiver
Installation and Operation Manual.
5. Connect additional cables to consecutive Station
connectors (2, 3, 4, etc.).
Figure 9
STAT 1 (J1) - STAT 10 (J10) Pin Definition for
V1301R Cable
Figure 10
STAT 1 (J1) - STAT 10 (J10) Pin Definition for
V1311RB Cable
Figure 11
STAT 1 (J1) - STAT 10 (J10) Pin Definition for
V7UVS Cable
