54
•
Reference
XX090-02-00 Rev 1102 System Console
Messages
Monitors
Message Displayed
when…
“Invalid Monitor Number!”
you’ve entered a monitor number exceeding the control
system’s or multiplexer’s maximum number of monitors.
Refer to the appropriate manual for limits.
“Not a Sequence Monitor!”
you’ve tried to start a sequence on a monitor that was not
defined as a sequence monitor.
“No Monitor Selected!”
you’ve tried to initiate a procedure before selecting a
monitor.
“Monitor Currently in Sequence”
a sequence is in progress.
“Invalid Dwell Time!”
you’ve entered a dwell time that exceeds 60 seconds.
Presets
Message Displayed
when…
“Invalid Preset Number!”
you’ve entered a preset number exceeding the maximum number
of presets. Refer to the appropriate manual for limits.
Cameras
Message Displayed
when…
“Camera Number Out-Of-Range!”
you’ve entered a number exceeding the maximum
number of cameras. Refer to the appropriate
manual.
“No Camera Selected!”
you’ve tried to start a sequence for a 1300 Series
control system before selecting a camera.
“In Sequence Pattern”
you’ve placed a camera in a sequence.
“All Cameras in Sequence Pattern”
you’ve placed all cameras in a sequence.
“Out of Sequence Pattern!”
you’ve removed a camera from a sequence.
“All Cameras Out of Sequence Pattern”
you’ve removed all cameras from a sequence.
“Tour in Progress!”
a tour has been loaded and is running.
Miscellaneous
Message Displayed
when…
“Invalid Key Press!”
you’ve pressed a key that does not correspond to an
expected keystroke sequence.
“OFF - Keypad Shut Off by Transmitter”
the control system has disabled your system
console.
“READY”
the system console is ready for keystoke input.
“NOVA Operating Mode”
the system console is waiting for communication with
the control system.
“SEIZE” the
currently
selected camera has been seized by
another keypad.