6
••
Installation
XX028-06-00 Rev 1002 Surveyor4 Fixed-Position Camera Dome
10. Loosen the two (2) screws at the corners of the electrical box and line up the screw holes with the two (2)
keyholes on the enclosure. Position the enclosure and attach it to the electrical box by lightly tightening the
corner screws until the enclosure is secure.
Note: Do not overtighten the corner screws; overtightening distorts the enclosure, making the installation of the
lower dome difficult
.
11. Connect the safety cord (lanyard) on the lower dome to one of the holes provided in the enclosure with the
screw that is provided.
Power Supplies
Vicon recommends several power supplies, depending on the needs of the installation. Refer to the table below.
For other multichannel power supplies, contact Altronix Corporation at 888-258-7669.
Model Number
Description
VC24PS-1
Single channel indoor, 24 VAC
V244I-4PS-05
4-channel indoor, 24 VAC
V248I-4PS
8-channel indoor, 24 VAC
Figure 2
Electrical Box Components
