XX004 Rev 500 Surveyor2000 Pressurized Housing Camera Dome
Technical Information
••••
23
Technical Information
ELECTRICAL
Input Voltage:
22 to 28 VAC.
Current:
3.0 A. 4.8 A with Surveyor2000.
Power Consumption:
72 W. 115.6 W with Surveyor2000.
Heat Equivalent:
4.1 btu/min (1.0 cal/min). 6.6 btu/min (1.6 cal/min) with
Surveyor2000.
Note: These figures represent the conversion of 100% of the electrical energy to heat. Actual percentage of
the heat generated will be less and will vary from product to product. These figures are provided as an
aid in determining the extent of cooling required for an installation.
Connector Type:
23 pin, circular, pressure rated. Mating connector included for access
to all Surveyor2000 signals including heater/blower, power,
communications and video.
Heater Power:
70 W. Will be capable of a cold-start de-icing of the lower dome.
Fan Cooling Rate:
16 cfm
(126 ccm).
Fuse:
5x20 mm, 4 A 250 VAC, slo-blo. Surveyor2000 has separate internal
fuses.
Safety Standard:
UL 2204 and CSA C22.2, No. 1
Radio Frequency Emission Rating:
FCC Class A.
European Community
(CE) Standards:
EN 50081-1 generic emissions.
EN-50082-1 generic immunity.
MECHANICAL
Application:
Indoor or outdoor.
Mounting
:
Vicon Wall Mount or 1-1/2 in. (38 mm) Vicon Pipe Mount.
Seal Type:
1 O-ring, fabricated from Neoprene, 0.139 in. (3.5 mm) cord diameter
and an EPDM (rubber) gasket.
Mount
Size/Thread:
4 threaded hole pattern (3.75 in./95 mm square) on top used for
mount attachment. Each threaded hole is 1/4-20 x 0.41 in. (10 mm)
deep. Gasket provided to seal top interface.
Summary of Contents for surveyor 2000 XX004
