Vicon PILOT PLUS V1544, Installation And Operation Manual

Page: 109 / 142

3-68
|
Chapter 3 Configuration
XX200-00 Pilot Plus
specified preset. The Triggered Events screen would be defined with Trigger
Input # 1, Trigger Type as Preset, Preset # as Preset #1 and Receiver # as
20. If an operator activates the switch, receiver 20 would direct the pan-and-
tilt drive on camera 20 to the preset position defined as preset #1.
Note: You must add alarms before you can define triggered events.
The Triggered Events screen has a two-column table on the left and a multi-
column table on the right. The multi-columned table fields will change
according to the type of event selected in the two-column table. You can set
up 128 different triggered events on the system.
The following paragraphs describe the event types. The field columns and
their actions are described in the accompanying table for each event type. A
description of each field parameter is displayed on the screen when the field
is selected.