2
••••
Introduction
XX128-02-00 Rev 904 Kollector Pro Network Digital Video Recorder
For Novice Installers
Complete the remainder of this chapter and then proceed to
Chapter 3, Installation
. When complete, proceed
to
Chapter 4, Operation
to power-on and boot the system. For software information, refer to the Kollector Pro
Software Manual, XX128-3X (where X is a revision number between 0 and 9).
Accessory Kit
The provided accessory kit contains necessary items needed to install and wire the recorder during
installation as follows:
Table 1-1: Accessory Kit
Part Description
Quantity
Front Door Key
Opens the front panel door.
2
Installation and Operation Manual
1
Software Manual
Provides instructions on installation, configuration and operation.
1
RJ45 Cable Assemblies
16
Termination Boxes
Connects external devices (sensor input) and communication signals
(RS-422 PTZ control).
16
Video Adapter Cable (certain
models)
Used to adapt the video card ports for various monitors.
1
Optical Mouse
Used for GUI operation of the ViconNet software.
1
Looping Cable
Provides additional video looping outputs from each camera for use
with other video components.
2
Power Cord
Used for power connection of Kollector Pro
1
Unpacking and Inspection
All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to
provide suitable delivery.
Inspect the cartons upon delivery and, if damage is present, make detailed notes on the carrier’s bill. Then,
obtain the carrier agent’s signature and file a damage claim as soon as possible.
Open the cartons and inspect the equipment for damage. Save the cartons and packing material. If damage is
present, contact the carrier and file a damage claim immediately. If the equipment must be returned for repair,
follow the instructions in
Chapter 7, Shipping Instructions
.
Summary of Contents for Kollector Pro
Page 2: ......