
XX128-02-00 Rev 904 Kollector Pro Network Digital Video Recorder
Technical Information
••••
21
Chapter 10
Technical Information
Table 10-1: Technical Information
Electrical Characteristics
Input Voltage
120 - 230 VAC ±10%, 50/60 Hz nominal.
NOTE:
Vicon requires the use of uninterruptible power supply systems (UPS) to prevent voltage
fluctuations that can affect operation and cause damage to the equipment. Failure to comply with
this violates the unit warranty.
Current
3 A
Power Consumption
450 W nominal
UPS Requirements
•
=
Capacity: 1000 VA/600 W
•
=
Maximum operation time:
•
=
16 cameras recording/displaying with a 15" Sony CRT monitor): 18 minutes
•
=
16 cameras recording/displaying with a 17" Mag CRT monitor): 5 minutes
•
=
Input:
•
=
Voltage: 120 - 240 VAC
•
=
Voltage Range:
±
30% (with a 4-step AVR)
•
=
Frequency: 47 – 63 Hz (auto detection)
Heat Equivalent
25.6 BTU/min (6.4 kg-cal/min)
NOTE:
These figures represent the conversion of 100% of the electrical energy to heat. Actual
percentage of the heat generated will be less and will vary from product to product. These
figures are provided as an aid in determining the extent of cooling required for an installation.
System
CPU: For 30 and 60fps recorders – Intel® Celeron® 1.8 MHz minimum
For 120fps recorders – Intel® Pentium IV 2.4 MHz minimum
RAM: 512 MB
HDD: 200 – 900 GB
LAN Card: 3Com 10/100 Mbps TPO
Connector
Types/Quantities
Analog Video Inputs: 16 BNC-F
Analog Video Loopouts: 16 in 1 DB-15 connector
Power: 1 standard 3-conductor female socket
VGA Video Output: 1 standard VGA port
Sensor Input Port: 16 NO/NC RJ-45 connectors, software selectable.
PTZ Control Port: 16 individual RJ-45 connections or one 4-pin terminal block using RS-422
protocol
Network Port: Ethernet 100Base-T RJ-45 jack
Keyboard Port: Mini-DIN jack (PS2)
Mouse Port: Mini-DIN jack (PS2)
Video Level Input
All BNC connectors: 1.0 V peak-to-peak
Video Input
Impedance
All BNC connectors: 75 ohms
Video Formats
Supported
NTSC, PAL, EIA and CCIR
Summary of Contents for Kollector Pro
Page 2: ......