XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
Configuring the ViconNet System
•
75
Using Reset Nucleus
The purpose of the Reset Nucleus feature is to clean up the site lists and sub-lists in the
Recording
Verification System
,
Central Failure Notification
and
Macro Editor
(for
Send Alarm
) windows by removing all
associated disconnected sites.
NOTE:
This feature is only available if the Kollector Pro is the nucleus (or by remote from another site with
the correct authorizations).
To reset the nucleus:
1. From the ViconNet
Main
window, click
. The
Setup Site Selection
window is displayed, as
shown on page 57.
2. Select your Kollector Pro and click
. The
System Settings
window is displayed, as shown on
3. Click
. All disconnected sites that appeared in the site lists in the
Recording
Verification Site
,
Central Failure Notification
and
Macro Editor Send Alarms
site lists have now been
removed from the lists. An example is shown below:
Before clicking
Reset Nucleus
, disconnected sites on the network appear with the (*) symbol in the site
lists, as shown in the list of Notification Sites in the
Recording Verification System
window below:
Disconnected
Site
Disconnected
Site
After Reset Nucleus, the disconnected sites are removed from the site lists: