72
•
Configuring the ViconNet System
XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
6. To configure/modify additional sensors, repeat steps 1 to 5, as required.
As you select another button in the
Devices Settings
window, the new or modified name of the sensor
that you have just configured is displayed automatically on the appropriate button in the
Detector
section, and the configuration is automatically saved.
7. Click
. The new or modified sensor configuration is saved automatically in the system (without
requiring a reboot), and the sensor appears in the
Site List
in the ViconNet
Main
window as an available
device, meaning it is available immediately for all operations.
NOTE:
After you have configured a device in the system, it also appears in all other device lists, such as
when defining alarm setup links. Refer to the relevant sections in this chapter for additional details.
Configuring/Modifying Relays
The ViconNet system enables you to configure or modify up to 16 relays, if required.
NOTE:
The relays are only enabled in this window when using the new Kollector Elite rear panel. In this
case, the system automatically recognizes the relays.
To configure/modify a relay:
1. Perform steps 1 to 3 in
Configuring/Modifying Local cameras
2. Select a relay button from the
Relay
section of the
Devices List
area. The
Relay Settings
area at the
bottom of the window displays all the configurable settings for the selected device.
3. In addition, a numerical index number is displayed automatically in the
ID
field. The ID number is
assigned by the system and cannot be changed (read-only).
4. In
the
Name
field, enter a logical name for the relay. For example, you can assign a name that relates
to the p
roper relay operation
.
5. (Optional) In the
Description
field, enter descriptive textual information about the relay.