98
•
Configuring the ViconNet System
XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
4. Select the required cameras to be configured for auto recording by selecting their checkboxes.
You can select or deselect all the cameras at once by clicking the respective option, as follows:
Option Description
All local cameras will begin recording automatically as soon as the
ViconNet
application starts, according to the selected recording settings.
This option is disabled in the Kollector Pro and Kollector Network Server.
Cameras will not record automatically when
ViconNet
application starts.
This option is disabled in the Kollector Pro and Kollector Network Server.
After selecting all cameras with max FPS you can deselect individual devices that are not required by
clicking their checkboxes.
5. Select the required
Video
settings for each selected device. (Dropdown lists are enabled when a device
line is selected.)
Option Description
Quality
The picture quality that you select determines the resolution at which the video
images will be recorded. Select the required picture quality from the range of
one to eight, where:
•
1
= best picture quality but slowest data transmission.
•
8
= least clear picture quality but fastest data transmission.
NOTE:
When different recording options are requested concurrently,
the recorded picture quality that applies is determined
according to prioritization settings. For details, refer to the
Picture Quality and FPS Priority section, page 118.
FPS
Select the required frames per second (the rate at which the live video
segments are recorded/displayed) from the following ranges:
•
NTSC:
1-30
•
PAL:
1-25
•
Max:
Sets the frames per second rate to the maximum available from the
system.
NOTE:
When different recording options are requested concurrently,
the recorded FPS that applies is determined according to
prioritization settings. For details, refer to the Picture Quality
and FPS Priority section, page 118.