XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
Configuring the ViconNet System
•
115
All macros that you define(d) are available during alarm setup, as described in the following sections:
•
Defining Alarm Setup Links
, page 122.
•
Creating Schedules
, page 137 (via the
Scheduler Settings
window).
•
Manual selection, as described in
Chapter 7, Managing Macros and Schedules
(manual).
Creating Matrix Macros
NOTE:
If there is no rear panel (optional) in the Kollector Pro, the matrix macro is not active.
If the Kollector Pro has the new rear panel, which supports matrix (and has four outputs), it enables four
digital streams to be converted back to analog. In this case, Servers, such as analog monitors or TVs, can
view these four outputs. The purpose of the matrix macro, is to enable configuration of a specific camera to
a specific output (of these four outputs), such that the camera output displayed can be changed every few
minutes For example, you can select that the analog monitors will display the output from cameras 1 to 4
first, and after a few minutes, change the display on the analog monitors to cameras 5 to 8.
To create a matrix macro:
1. From the ViconNet
Main
window, click
. The
Setup Site Selection
window is displayed, as
shown on page 57.
2. Select your Kollector Pro and click
. The
System Settings
window is displayed, as shown on
3. Click
. The
Macro Editor
window
is displayed.
4. Click
. The
Macro Editor
window changes and displays the
Macro
area in the middle
of the window.
5. In
the
Macro Name
field, enter a logical name for the macro, for example,
Front Entrance
External
Cameras
or
Emergency – All Cameras Recording
.
NOTE:
The
User Name
is displayed automatically according to your log in information.
6. (Optional) In the
Description
field, enter a brief textual description of the macro.