XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
Recording Live Video
•
179
The following example shows four live cameras displayed and ready for recording in the
Video Display
area, with the name of each camera located at the top of each video display location.
4. To display live video from additional cameras, repeat step 3, as required.
TIP:
To reverse a selection, click the required camera in the tree again. The live video transmission for the
deselected camera is stopped.
NOTE:
You can change the picture quality and refresh rate settings for manual recording. Refer to the
Configuring Manual Recording and Picture Quality section in Chapter 3, Configuring the ViconNet
System.
5. Click
. The following occurs:
•
The button changes to
.
•
The currently active cameras begin recording live video simultaneously.
•
The recorded data is loaded and stored into the predefined storage location.
NOTE:
When the storage location is full, older files are automatically emptied chronologically to make room
for newer files.
6. To stop recording, click the
button. It changes back to
. The active
cameras stop recording, but the live video continues to be displayed.
NOTE:
Clicking
STOP
turns off all cameras.