16
EN
16624471_en (04/2005)
1.10 Maintenance
Directions quoted („right“, „left“, „in front“,“behind“) are always taken as being in the direction of
travel.
The sense of rotation is defined as follows:
Rotation sense right = clockwise,
Rotation sense left = anticlockwise,
Rotations around a vertical axis, taken from top to bottom,
Rotations around a horizontal axis, at a right angle to the direction of travel, taken from left to
right,
Rotations of nuts, bolts etc. are always taken from the actuation direction.
1. As a rule, disengage the driving system and stop the engine prior to carrying out any maintenance,
servicing, cleaning or repair work! Always remove the ignition key!
2. Check all bolts and nuts at regular intervals and retighten as required. Comply with prescribed
torques!
3. Prop the implement with appropriate supports before carrying out maintenance work on the lifted
implement!
4. When changing working elements use appropriate tools and protective gloves !
5. Discard used oil, grease and filters according to regulations!
6. Always disconnect the power suppy (current) before carrying out any work on the electrical system!
7. The protection devices which are subject to wear and tear must be inspected frequently and be
exchanged in good time.
8. The generator and battery cables should be disconnected before any electrical welding is carried
out on the tractor or the mounted implements!
9. Do not clean the machine with aggressive washing agents. This can cause corrosion to polished
metal surfaces, e.g. hydraulic cylinders.