manualshive.com logo in svg

Vicon Andex 774, Assembly Instructions Manual, Page: 27 / 70

Share
Download
Vicon Andex 774 Assembly Instructions Manual Download Page 27

Crate packaging

27

Fitting the control 

segment

The control segment regulates the interval between the times at which 
the front and rear rotors are raised. The control segment is fitted to the 
front lift arm.

Place the sealing ring (2) onto the flange piece.

Place the washers (4) onto the bolts (5).

Fasten the control segment (1) and spacer with bolts (5).

Adjusting the control 

segment

Slightly loosen the bolts (5) and move the position of the control 
segment (1) in the elongated hole in order to change the interval 
between the times at which the front and rear rotors will be raised.

Tighten the bolts (5) in the desired position.

Moving the control segment clockwise shortens the time between the 
points when the front and rear rotors are raised.

No.

Quantity

Part

1

1

Control segment

2

1

Sealing ring

3

1

Spacer with lubricating nipple

4

2

M10 washers

5

2

M10 x 80 Allen bolts

1

2

3

4

5

Summary of Contents for Andex 774







































































Reviews:

No comments