6-3 Communication Data and Commands
-63-
6-3 Communication Data and Commands
The RS-232C interface exchanges data with external devices as follows:
は
か
り
外
部
機
器
出力データ
（測定データなど）
入力コマンド
（本製品を外部から制御）
応答データ
（入力コマンドに対する応答）
Output data
The three formats of “6-digit numeric,” “7-digit numeric,” and “extended 7-digit numeric”
formats are available. Select a format with the following operation:
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting Basics (P.
16).)
Press and hold the [Function] key. After “
”
is displayed, release the finger.
2
Press the [Function] key several times to select “
”.
Press the [Zero/Tare] key to select a format.
1 = 6-digit numeric format
2 = 7-digit numeric format
3 = Extended 7-digit numeric format
3
Save the setting.
Press the [Set] key.
The balance goes back to normal display.
Output data
(Measurement data, etc.)
Input command
(Used to control the balance externally)
Response data
(Response to input commands)
External device
Balance
