manualshive.com logo in svg

Viavi T-BERD MTS 5800, Getting Started Manual

Share
Download
Viavi T-BERD MTS 5800 Getting Started Manual Download Page 30

Chapter 1  

Overview

Inspecting the components for damage

T-BERD/MTS/SC Getting Started Guide

Page 6

22046561, Rev. 016

March 2018

When unpacking the components, verify that all the items you ordered are included in 
the package. Accessories may be shipped in a separate box.

After you unpack the components, you should inspect them for damage.

If undamaged, consider saving the box and packing materials in case you need to 
repackage the components for shipment. For information about shipping equipment, 
see 

Appendix C   “Storage and Shipment” 

.

Inspecting the components for damage

After you unpack the components, examine the connectors, ports, LEDs, and screen 
for damage. Be sure to check the top, bottom, and front panels.

If you find damage, contact Viavi Customer Care at 1-844-GO-VIAVI. For the latest TAC 
information, go to 

http://www.viavisolutions.com/en/services-and-support/support/tech-

nical-assistance

. 

For information about returning equipment, see 

“Returning equipment to Viavi” on 

page 263

.

Accessories

Table 4

 lists some of the accessories available for the instruments.

Table 4

Accessories 

Accessory

Description

Transceivers

A variety of Viavi recommended SFP, SFP+, XFP, QSFP+, 
QSFP28, and CFP transceivers (and adapters) are available 
for testing optical circuits. Be certain to only use Viavi recom-
mended transceivers and adapters with your test instrument. 
Each of the transceivers and adapters offered by Viavi as an 
accessory is MSA compliant, and has been qualified for use 
with your instrument. A list of Viavi recommended optics 
shipped with your instrument or upgrade kit.
For a list of currently supported optics, contact your Viavi TAC 
representative or your local Viavi sales office. Please refer to 
your transceiver (or adapter) manufacturer’s site for detailed 
specifications.

Cables

A variety of Viavi-recommended optical cables are available for 
connecting to the circuit you are testing.

TB/MTS-5800-
EPP 

The 5800 Ethernet Pairing Partner is an accessory used for 
enhanced RJ-45 Ethernet cable diagnostics. It includes two 
RJ-45 ports, one for completing a wire-map test with a TB/
MTS-5800 and the other for performing a shield ground conti-
nuity test with the RJ-45 connector on port 2 of a TB/MTS-
5882.

Summary of Contents for T-BERD MTS 5800









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands